AudioRoundTable.com: Pi Speakers » Pi 4 with 2226h plan request.

Home » Sponsored » Pi Speakers » Pi 4 with 2226h plan request.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

selenium says min. xover is 1200Hz. [message #38334 is a reply to message #38329]

Wed, 18 September 2002 08:10

Sam P.
Messages: 307
Registered: May 2009

Grand Master

for the 205Ti driver. The fr chart shows them starting to drop off in level below 1.2 or 1.5kHz., down at least 4dB by 1000Hz, probably horn flare dependent to some degree, the ferro fluid should help when operating closer to Fs(did not notice the spec) by damping the resonance some. The 4 Pi Pro's run the 2226H's out to 1.6kHz. without problems, why not just cross at 1.2kHz/12dB/octave like selenium says? Sam

Report message to a moderator

[Message index]

		Pi 4 with 2226h plan request. By: Scholl on Wed, 18 September 2002 04:05
		selenium says min. xover is 1200Hz. By: Sam P. on Wed, 18 September 2002 08:10
		You've got mail! By: Wayne Parham on Wed, 18 September 2002 11:18
		Please try this By: Scholl on Wed, 18 September 2002 16:04
		Re: Please try this By: Scholl on Sat, 21 September 2002 04:08
		Re: Pi 4 with 2226h plan request. By: Ciscokid on Wed, 18 September 2002 16:35
		"Tube friendly" speakers By: Wayne Parham on Wed, 18 September 2002 17:12
		Re: Pi 4 with 2226h plan request. By: Scholl on Sat, 21 September 2002 04:07

Previous Topic:	Two pi: Motorola tweeter help
Next Topic:	Pi Hometheatre System

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 22:15:49 CST 2024