Reconing JBL D130's [message #38203] |
Thu, 05 September 2002 20:30 ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
Coner
Messages: 3 Registered: May 2009
|
Esquire |
|
|
Have a few D130 (alnico) frames sitting here, what do you guy's recommend I recone these as? Say, which for a
|
|
|
Re: Reconing JBL D130's [message #38208 is a reply to message #38203] |
Fri, 06 September 2002 12:34 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) ![Go to next message Go to next message](/forum/theme/AudioRoundTable/images/down.png) |
![](http://audioroundtable.com/forum/images/custom_avatars/5.gif) |
Wayne Parham
Messages: 18749 Registered: January 2001
|
Illuminati (33rd Degree) |
|
|
I usually recone with the genuine original kit, unless it isn't available. The D130, D130F and D130H use the JBL recone kit C8RE130, and the D130F-16 uses the C16RE130 kit. See the "where used" document below.You might call David Miller at Speakerworks in Tulsa, (918) 664-6299. He's authorized by JBL, keeps most reconing kits in stock and he's really good. Wayne
|
|
|
Re: Reconing JBL D130's [message #38214 is a reply to message #38208] |
Sat, 07 September 2002 12:54 ![Go to previous message Go to previous message](/forum/theme/AudioRoundTable/images/up.png) |
Coner
Messages: 3 Registered: May 2009
|
Esquire |
|
|
Looks like 2235 is best bet for small ported. Now, what's the best for horn loaded (A-7) cab.? I will be using genaric cone kits like waldom.Problem with the "keep original" idea is I have no use for a M.I. speaker (D130).
|
|
|