AudioRoundTable.com: Pi Speakers » yeehaw, no smoke came out

Home » Sponsored » Pi Speakers » yeehaw, no smoke came out

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

yeehaw, no smoke came out [message #38198]

Thu, 05 September 2002 17:23

Sam P.
Messages: 307
Registered: May 2009

Grand Master

Marchand XM9 active crossover kit went together in about 15 hours, and was a "zero defect" project. No hum, no crosstalk, just good sound. For initial tests I just decreased the HF level adjustments by 12dB per the dial marks. Done for tonight, time to party...I'll put the unit in the rack and "neaten up" later. Oh yeah, crossed at 800Hz. of course:) But I already made some 500Hz. and 1.6kHz. freq. modules... Sam

crap, I installed the lm353's, and left the "good" opamps on the work bench...wouldn't have been prudent to "smoke" those upgrade devices anyway.

great dynamics with 200wpc LF and 100wpc HF:) gotta still be running class a.

Report message to a moderator

[Message index]

		yeehaw, no smoke came out By: Sam P. on Thu, 05 September 2002 17:23
		Re: yeehaw, no smoke came out By: Wayne Parham on Thu, 05 September 2002 20:24
		yes, they plug into sockets By: Sam P. on Fri, 06 September 2002 05:56
		I'd kind of been looking at that kit... By: trancemitr on Fri, 06 September 2002 09:25
		all you really need By: Sam P. on Fri, 06 September 2002 15:34
		Re: yeehaw, no smoke came out By: elektratig on Sun, 08 September 2002 03:07

Previous Topic:	Reconing JBL D130's
Next Topic:	Ping Mike Baker

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 01 15:00:18 CST 2024