AudioRoundTable.com: Pi Speakers » Horn - install in cabinet or not?

Home » Sponsored » Pi Speakers » Horn - install in cabinet or not?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

One more thing...actually 2 [message #38197 is a reply to message #38196]

Thu, 05 September 2002 16:23

LuxmanLover
Messages: 164
Registered: May 2009

Master

Thx for the speedy response (that's one). Also I would consider doubling up the MDF on the baffle or use 1" material as it's going to be a little thin if you flush the horn all the way in. As far as the appearance thing...I think it's the fact that the port is flush with the baffle that makes the horn flange look out of place standing proud as it were...I'll let you know once I hog it out.
Kelly
THX again

Report message to a moderator

[Message index]

		Horn - install in cabinet or not? By: laoye on Thu, 05 September 2002 15:21
		4Pi pro By: LuxmanLover on Thu, 05 September 2002 15:45
		Flush mount By: Wayne Parham on Thu, 05 September 2002 15:57
		One more thing...actually 2 By: LuxmanLover on Thu, 05 September 2002 16:23
		you can try glueing By: Sam P. on Thu, 05 September 2002 18:06
		I thought about.... By: LuxmanLover on Thu, 05 September 2002 19:52
		Re: Horn - install in cabinet or not? By: Wayne Parham on Thu, 05 September 2002 15:50

Previous Topic:	Sub-Woofer cabinet
Next Topic:	OT: How I Spent My Summer, by......

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 27 07:19:04 CDT 2024