AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2 Pi Tower Plans

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Additional 3/4" MDF answer [message #37992 is a reply to message #37975]

Thu, 22 August 2002 14:23

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

When making the cabinet with 3/4" wood, cut the port hole 4 5/8" diameter. I can't say what you'll get if you modify overall cabinet dimensions, but I expect it will be OK if you don't vary too much. Keep volume the same and leave the distance between port and cabinet floor the same. Also maintain the distance relationships between the woofer, the tweeter and the top of the cabinet.

Report message to a moderator

[Message index]

		2 Pi Tower Plans By: JohnB on Thu, 22 August 2002 03:40
		You've got mail! By: Wayne Parham on Thu, 22 August 2002 03:44
		Re: 2 Pi Tower Plans By: Edwin on Thu, 22 August 2002 07:07
		Additional 3/4" MDF question By: Matts on Thu, 22 August 2002 10:15
		Additional 3/4" MDF answer By: Wayne Parham on Thu, 22 August 2002 14:23
		Re: Corrected 3/4" MDF calculations By: Matts on Thu, 22 August 2002 15:02
		Re: Additional 3/4" MDF answer By: JLM on Mon, 09 September 2002 12:40

Previous Topic:	tall Studio 2 ???
Next Topic:	I'm not gonna be able to fit into my helmet

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 06 15:55:37 CST 2024