I just measured a mailing tube I found at the office to use as a port for my 1 pi's. The ID of the port is 2 7/16 with a wall thickness of about 1/16. Is this close enough to work correctly in a 1 pi? What length should I use w/ a 3/4 in. baffle?
Thanks for all the help. As soon as the Motorola tweeters come off backorder, I should have these finished!
Wayne Parham Messages: 18791 Registered: January 2001
Illuminati (33rd Degree)
That's exactly the tube your speakers were designed to use. It's a standard mailing tube having 2.5" OD and 0.060" wall thickness, which is then 2.38" ID. The total port length from entrance to exit should be 3.5".
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
