| Crossover question(s) [message #37883] |
Mon, 19 August 2002 10:17  |
LuxmanLover
Messages: 164
Registered: May 2009
|
Master |
|
|
On the 4Pi Pro's....or any of the crossovers I guess, would it be worthwhile to build R1 and R2 using higher than rated resisters,
ie. using 4 25 watt 120 ohm resisters all tied together in parallel to make a 100 watt 30 ohm resister, or what ever combination works out to get a value higher than a 40 watt rating, or is that a waste of $$$$.
Kelly
|
|
|
|
|
|
|
|
| Re: L2 should be 0.7mH w/ the 2226H's [message #37890 is a reply to message #37885] |
Mon, 19 August 2002 18:01  |
bmar
Messages: 346
Registered: May 2009
|
Grand Master |
|
|
|
Yes Like Sam said. Wayne has these babies ready to handle the full 600 watts and probly a safty margin. and that's max on the driver's I only use 10watt resisters and they dont even get warm for playing music in the house. Take my setup outside and put the feed to it and you'll see a smoke show! but for inside at levels more than loud enough to deafen you derated works for me. Bill
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
