AudioRoundTable.com: Pi Speakers » Crossover question(s)

Home » Sponsored » Pi Speakers » Crossover question(s)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Crossover question(s) [message #37883]

Mon, 19 August 2002 10:17

LuxmanLover
Messages: 164
Registered: May 2009

Master

On the 4Pi Pro's....or any of the crossovers I guess, would it be worthwhile to build R1 and R2 using higher than rated resisters,
ie. using 4 25 watt 120 ohm resisters all tied together in parallel to make a 100 watt 30 ohm resister, or what ever combination works out to get a value higher than a 40 watt rating, or is that a waste of $$$$.
Kelly

Report message to a moderator

[Message index]

		Crossover question(s) By: LuxmanLover on Mon, 19 August 2002 10:17
		Re: Crossover question(s)Part 2 By: LuxmanLover on Mon, 19 August 2002 10:22
		L2 should be 0.7mH w/ the 2226H's By: Sam P. on Mon, 19 August 2002 10:35
		Re: L2 should be 0.7mH w/ the 2226H's By: bmar on Mon, 19 August 2002 18:01

Previous Topic:	Two Pi's Up and Running!!
Next Topic:	more on (or moron on ) crossovers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 21:22:56 CST 2024