Home » Sponsored » Pi Speakers » photo of theater 4 pi's
Response curves of the big π's [message #37820 is a reply to message #37817] Thu, 15 August 2002 20:24 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18748
Registered: January 2001
Illuminati (33rd Degree)
The Delta 15 used in Theater Series four π Speakers really needs a large box, and even with that, they tend to have rising response into the midrange. The bass is clean and full, but many people still like to augment them with a sub.

I think George built his exactly as the plans indicate, and if not then perhaps he'll correct me. But the plans for Theater Series four π Speakers show a 4" diameter port that's 3.5" long. The intended port material has 0.080" wall thickness, and that's what is included with the kits. This makes the actual port diameter be 3.84", and system tuning is therefore 23Hz. Response is shown below:

Response of Theater Series four π Speaker

The Stage and Premium Stage Series speakers share the same cabinets with their Professonal Series counterparts. Here are the response curves for the Stage and Premium Stage speakers:

Response of Stage Series four π Speaker

Response of Premium Stage Series four π Speaker

Just for those that are unfamiliar, π Theater Series use Eminence Delta parts, Stage Series use Omega's and Premium Stage Series use Kilomax components.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Conversion
Next Topic: theater four pi's finished (longish)
Goto Forum:
  


Current Time: Wed Aug 14 04:11:47 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest