AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Crossover network

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Crossover network [message #37803 is a reply to message #37801]

Thu, 15 August 2002 05:57

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

There are photos of the compensation network cable assemblies in the post called "Compensation networks - Photos". I expected I could find a photo of the "base unit," which is the Eminence PXBII1K6 crossover, but surprisingly, I couldn't. You can find photos of a couple of their offerings, but not that particular crossover. So one of these times soon, I'll do exactly as you've suggested, and put a photo of the PXBII1K6 online.

Also, Brendon (Super_BQ) has a photo of the crossover on his web page at www.geocities.com/super_bq/4Pi.html. Brendon chose to wire his network completely from individual components rather than to use the printed circuit board. Some do this so they can "hand pick" the components used.

Report message to a moderator

[Message index]

		Crossover network By: ozzi on Thu, 15 August 2002 04:05
		Re: Crossover network By: Wayne Parham on Thu, 15 August 2002 05:57
		Wayne's top picture By: ozzi on Thu, 15 August 2002 06:12
		Am I also correct to say that.......... By: ozzi on Thu, 15 August 2002 06:19
		Yes, on both counts By: Wayne Parham on Thu, 15 August 2002 06:23

Previous Topic:	Anyone have a spec sheet for MD2001
Next Topic:	JBL 2241H

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 12:35:39 CST 2024