Home » Sponsored » Pi Speakers » Anyone have a spec sheet for MD2001
Anyone have a spec sheet for MD2001 [message #37798] Wed, 14 August 2002 06:42 Go to next message
demanddeepbass is currently offline  demanddeepbass
Messages: 5
Registered: May 2009
Esquire
Hi guys I've been offered the choice of a pair of Eminence MD2001s or a pair of PSD2002s but the specs for the 2001 have been taken off the Eminence website now, does anyone have a copy? Also any comments from people who have compared both would be much appreciated. I want to X-over at about 1.2K, poss slightly lower (might make the 2002 a bad option) and I don't want to add another driver above this one (might make the 2001 a bad option - from memory it was only rated to 15K?????). Which one:

A. sounds nicer?
B. could be more easily EQed/have it's X-over tweaked, to cover the range I want it to?

Cheers,

Olly

P.S. I'm using a Behringer CX3400 as X-over which has 24dB/octave filters. Is the suggested working range for the 2002 using 12dB/octave and if it is would this mean I could go a bit lower with 24dB filters?

Re: Anyone have a spec sheet for MD2001 [message #37800 is a reply to message #37798] Wed, 14 August 2002 11:29 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

You've got mail!

I've sent LMS measurements of the Eminence MD2001 and the 2039 Type I and Type II drivers.

Previous Topic: RE: New Models
Next Topic: Crossover network
Goto Forum:
  


Current Time: Mon Dec 02 05:35:52 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest