AudioRoundTable.com: Pi Speakers » fibreglass insulation oops

Home » Sponsored » Pi Speakers » fibreglass insulation oops

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

fibreglass insulation oops [message #37555]

Mon, 29 July 2002 07:18

oscar
Messages: 2
Registered: May 2009

Esquire

oops forgot to attach this

http://www.gissa.co.za/aerolite.htm

Report message to a moderator

the 50mm thickness [message #37556 is a reply to message #37555]

Mon, 29 July 2002 08:27

Sam P.
Messages: 307
Registered: May 2009

Grand Master

should be close to R11/R13. The R19 I used before was too thick(3.5 inchs), and my final(?) configuration involved reducing it's thickness by 1/2, to approx. 1.75 inches. 2.54cm to the inch, I think 5cm/50mm thickness would be "ideal". Sam

I looked at the R13 I used for my sun room, even that looks a bit thicker/denser than what I ended up with after "splitting" the R19.

Report message to a moderator

Re: Thanx, That's what I thought too, I'll give it a try [message #37572 is a reply to message #37556]

Tue, 30 July 2002 07:00

oscar
Messages: 2
Registered: May 2009

Esquire

Report message to a moderator

Previous Topic:	One Pi with sub in one cabinet (ie: 3-way)
Next Topic:	More on Canadian JBL pricing

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Aug 08 01:53:58 CDT 2024