I've been playing with boxplot and can't seem to make it do what I want. I've decided to build the 2's with a rectangular, acoustically inert base 10" tall and put a polygon on top with all sides parallel but the front baffle which would slope toward the top 11 1/4 degrees. That would put the tweeter at about 30" above ground and firing up. I think the box should be 15wX22hX12.5d. Could you check my figures, please?
Wayne Parham Messages: 18793 Registered: January 2001
Illuminati (33rd Degree)
Your dimensions sound about right, but if you'll make me a drawing and send it to me, I'll double check. I'm not sure about the volume because I'm not sure I'm visualizing your box shape right. But I see that you've offset some for the slanted top, and I expect that puts you where you need to be.
I was talked out of the idea (especially the tweeter on a stalk) but as you have laid down the gauntlet, you force me to create a 20 layer lamination or else use very expensive bending plywood. In lieu of pistols at dawn, I will send you a drawing and ask that you compute the dimensions for internal volume. Full speed ahead. Wayne delivering another Pi speaker
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
