Home » Sponsored » Pi Speakers » Wayne, a little help, please?
Wayne, a little help, please? [message #37468] Wed, 24 July 2002 06:58 Go to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
I've been playing with boxplot and can't seem to make it do what I want. I've decided to build the 2's with a rectangular, acoustically inert base 10" tall and put a polygon on top with all sides parallel but the front baffle which would slope toward the top 11 1/4 degrees.
That would put the tweeter at about 30" above ground and firing up.
I think the box should be 15wX22hX12.5d.
Could you check my figures, please?
Sounds right [message #37471 is a reply to message #37468] Wed, 24 July 2002 13:50 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18772
Registered: January 2001
Illuminati (33rd Degree)
Your dimensions sound about right, but if you'll make me a drawing and send it to me, I'll double check. I'm not sure about the volume because I'm not sure I'm visualizing your box shape right. But I see that you've offset some for the slanted top, and I expect that puts you where you need to be.

P.S. What happened to the "Cyclops

Now that you mention it (P.S.) [message #37474 is a reply to message #37471] Wed, 24 July 2002 15:19 Go to previous messageGo to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
I was talked out of the idea (especially the tweeter on a stalk) but as you have laid down the gauntlet, you force me to create a 20 layer lamination or else use very expensive bending plywood. In lieu of pistols at dawn, I will send you a drawing and ask that you compute the dimensions for internal volume.
Full speed ahead.

Wayne delivering another Pi speaker
"I shall taunt you a second time" [message #37475 is a reply to message #37474] Wed, 24 July 2002 15:35 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18772
Registered: January 2001
Illuminati (33rd Degree)
I was really hoping to see the "tweeter on a stick." Maybe even just a short stalk?
Previous Topic: A little more low end please!
Next Topic: Pi speakers with ASL gear
Goto Forum:
  


Current Time: Fri Sep 27 11:47:48 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest