AudioRoundTable.com: Pi Speakers » Assembled my 1 Pi cabinets yesterday

Home » Sponsored » Pi Speakers » Assembled my 1 Pi cabinets yesterday

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Got the plans! (And port placement question) [message #37434 is a reply to message #37432]

Mon, 22 July 2002 02:19

Erik Johansson
Messages: 65
Registered: May 2009

Viscount

Since I'm using a 65mm ID (70mm OD) port. Is it ok to still place the port so that it's outer edges are 25mm (1 inch) from the side and bottom? The center of the port would then be something like 5-6mm off from the original placement.

/Erik

Report message to a moderator

[Message index]

		Assembled my 1 Pi cabinets yesterday By: Erik Johansson on Sun, 21 July 2002 20:17
		Interesting specs... By: Erik Johansson on Sun, 21 July 2002 20:36
		Re: Interesting specs... By: Wayne Parham on Sun, 21 July 2002 23:46
		Re: Interesting specs... By: Erik Johansson on Mon, 22 July 2002 00:31
		You've got mail! By: Wayne Parham on Mon, 22 July 2002 01:07
		Re: You've got mail! By: Erik Johansson on Mon, 22 July 2002 01:16
		Got the plans! (And port placement question) By: Erik Johansson on Mon, 22 July 2002 02:19
		Port placement answer By: Wayne Parham on Mon, 22 July 2002 02:50
		Photo's By: Erik Johansson on Mon, 22 July 2002 03:01
		Cabinet question... By: Erik Johansson on Mon, 22 July 2002 00:35

Previous Topic:	A question of amplifiers
Next Topic:	A wierd question

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Oct 18 03:41:07 CDT 2024