Home » Sponsored » Pi Speakers » What is Pialign?
Bigger bottle, shorter neck [message #37369 is a reply to message #37362] Wed, 17 July 2002 22:07 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18726
Registered: January 2001
Illuminati (33rd Degree)
A cabinet sized 53" X 18.5" X 7.125" is about four cubic feet, outside dimensions, so the cabinet would be tuned lower if it used the same port. But you'd lose bass response because the cabinet would be be tuned too low to do much good.

Assuming a few hundred cubic inches are displaced by components inside and by wood thickness, your cabinet is 3.5 cubic feet. So to tune this for 40Hz, you'll need to shorten the port to 5" long, assuming the same rectangular W x H dimensions of 3.5" x 6.0."

That will tune it to the same frequency as the "stock" Professional Series four π speaker, and it will sound pretty good. A 2226 works very well in cabinets from 2.0ft3 to 5.0ft3 tuned to 40Hz.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Didja ever see Wayne run?
Next Topic: Interesting discussion on Audiogon , Wayne, your thought?
Goto Forum:
  


Current Time: Wed Jul 17 09:42:58 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest