Home » Sponsored » Pi Speakers » i wanna feel the bass!
Re: i wanna feel the bass! [message #37334 is a reply to message #37315] Mon, 15 July 2002 19:31 Go to previous message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
If you search the archives for Titanic you can read the several posts between Wayne, Adam and myself re: the Titanic 12. The spec I finally used as recommended by Wayne:
PiAlign parameters then, are 9.89 cu. ft., 16Hz and 2.45. The cabinet PiAlign recommends is 4.0 cubic feet tuned to 15Hz with a 3.3" long x 1.6" dia cylindrical port or a 3" x 1.8" x 3.3" long rectangular port. This makes a nice flat response curve with -3dB at 25Hz, -6dB at 20Hz and -12dB at 15Hz.
You do really feel the bass and a candle held in front of the speaker or the port will blow out. (Okay, I was bored) But it's also musical, never calling attention to itself but really filling out the tracks on the Diana Krall "Live" DVD.
WTFDIK

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Wayne or anybody: L-pad values
Next Topic: which 3 sides do i insulate on my
Goto Forum:
  


Current Time: Mon Nov 18 13:29:51 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest