Home » Sponsored » Pi Speakers » box size for 2235
box size for 2235 [message #37307] Sun, 14 July 2002 20:28 Go to next message
spncer is currently offline  spncer
Messages: 4
Registered: May 2009
Esquire
I read with interest the box size for a 2235h, the pi-Align is 4 cubic feet yet JBL recommends 5 cubic feet tuned to ~ 40hz. What is the performance trade off between the box sizes?

Spencer

Re: box size for 2235 [message #37308 is a reply to message #37307] Sun, 14 July 2002 20:58 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18778
Registered: January 2001
Illuminati (33rd Degree)
JBL 22xx series woofers are pretty "cabinet friendly." They have a habit of building a rather small number of general purpose cabinets, and using one cabinet for several different woofers. In most cases, this approach works fine. But in this application, they pushed the limits, and the PiAlign'ed box is much better.

A 2235 in a 5 foot box tuned to 40Hz is underdamped, and makes a peak at 50Hz. It's not too bad if a box is slightly underdamped, and has a slight hump that spans an octave. That kind of response curve is even described by many as being a "powerful sound." But in this case, the peak is narrow enough that it doesn't sound good.

The PiAlign'ed cabinet provides the same lower cutoff, but response above cutoff is perfectly flat. So that's the one you want.

Previous Topic: Small sub
Next Topic: Any pi lovers in Australia?
Goto Forum:
  


Current Time: Fri Oct 18 02:35:25 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest