AudioRoundTable.com: Pi Speakers » Hybrid 2 Pi for SACD multi-channel?

Home » Sponsored » Pi Speakers » Hybrid 2 Pi for SACD multi-channel?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Hybrid 2 Pi for SACD multi-channel? [message #37253]

Wed, 10 July 2002 14:13

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

For several reasons, I'm thinking of building 4 - 2Pi's rather than a pair of the big guys for the Home Theatre.
One reason is having continuity on all the channels as I get SACD multi-channel up and running.
Another is that the Makore veneer I scored, while beautiful, is a tad too "early bordello" on a large scale.
So I'm wondering about the quality of the highs with the ceramic piezo tweeter. Okay for the movies but what about Coltrane or Emma Kirkby or Taj Mahal?
Plenty of room for the PSD-2002 with CH-3 in the 2 Pi cabinet, right? Worthwhile? Use the good ole PE crossover? Maybe go for a 10" JBL instrument speaker from the garage sale instead of the Eminence?

What do you all think?

Report message to a moderator

Piezo's vs. compression horns [message #37254 is a reply to message #37253]

Wed, 10 July 2002 14:53

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

For what it's worth, I like the improved top octave performance of the KSN-1038 in the little speakers. The biggest disadvantage is that they don't match a compression horn in terms of total output, but these smaller systems only hit about 115dB anyway. So the output from a KSN-1038 is adequate, and you get improved top octave performance in the trade.

Report message to a moderator

Re: Hybrid 2 Pi for SACD multi-channel? [message #37255 is a reply to message #37253]

Wed, 10 July 2002 18:46

mikebake
Messages: 243
Registered: May 2009

Grand Master

Till, you goin' to Kevins bash July 27th?!

Report message to a moderator

Re: Hybrid 2 Pi for SACD multi-channel? [message #37256 is a reply to message #37253]

Wed, 10 July 2002 18:53

bmar
Messages: 346
Registered: May 2009

Grand Master

Hi Till,

You will find that continuity amoung the four speakers is not necessary. The surrounds are only for ambiance and effects.
Matching them all close in efficiency would be good.

Building (4) 2pi's to use as surrounds and a pair or Rear centers would be too cool for school. (4) 1pi speakers would be great.

You need to build yourself a very pristine center speaker. I would bet 50% of the movie comes from the center. you want your dialogue and main scene effects coming from the center to be crystal clear and dynamic.

Next your Mains are going to unleash the brunt of the score and your 4 pi's are perfect for this. It doesnt get much better.

I have a pair of 2pi speakers and I use them for my surrounds now.
They are Perfect. just the right size, just the right SPL, just the dynamics. The 2 pi's replaced my JBL 4655 speakers for surrounds.

I have the room, so I use 4pi speakers for the from mains. Since I have the room for the 4pi's, I wouldnt switch them out for a quad of 2 pi's

Bill

Report message to a moderator