AudioRoundTable.com: Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Home » Sponsored » Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Can I build my Studio One Pi using 3/4" MDF? [message #36914]

Sun, 16 June 2002 15:17

Erik Johansson
Messages: 65
Registered: May 2009

Viscount

I´m wondering if it would work just as well using 3/4" instead of 5/8" MDF for the Studio One Pi cabinet. I can get 5/8" MDF but my friend who makes the pieces for me has some pieces of 19mm (3/4") laying around.

I would of course recalculate the cabinet so that the internal size is exactly the same.

/Erik

Report message to a moderator

[Message index]

		Can I build my Studio One Pi using 3/4" MDF? By: Erik Johansson on Sun, 16 June 2002 15:17
		Re: Can I build my Studio One Pi using 3/4" MDF? By: Adam on Sun, 16 June 2002 15:20
		Yes. Just make sure port length is right. By: Wayne Parham on Sun, 16 June 2002 19:55
		Re: Which MDF thickness do you recommend? 5/8"? By: Erik Johansson on Mon, 17 June 2002 10:09
		5/8" is plenty By: Wayne Parham on Mon, 17 June 2002 11:53

Previous Topic:	Anyone want to trade a pair of 2226H for my pair of 2226J?
Next Topic:	CAS Canadian Audio Speakers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 01:25:17 CST 2024