Home » Sponsored » Pi Speakers » Good lense for the JBL 2426H
Re: Eminence H290 [message #36627 is a reply to message #36623] Fri, 24 May 2002 18:40 Go to previous messageGo to next message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
Sorry for the confusion. The driver is only going down to 1kHz, but I'd like to keep the flare lower then that.

Adam

Re: Good lense for the JBL 2426H [message #36629 is a reply to message #36618] Fri, 24 May 2002 18:59 Go to previous messageGo to next message
ToFo is currently offline  ToFo
Messages: 219
Registered: May 2009
Master
Adam,
When I first got these things I mounted some Renkus Heinz Mid drivers to them to see how low they would go, and I can say they will make the bones in your ears click @ 800 Hz. I also got meaningful output from the psd 2002 @ 1000 Hz. I know I shouldn't have, but it was too tempting and easy with electronic x-over. 2002's sound lousy that low btw. It is a good clone of the 2370. Unfortunately the links below do not offer much info, but will allow you a source should you choose to try them. If you can see them at a shop next to a real JBL you will buy them. Without the logo I would not have been able to tell you the difference. The flare, support ribs, and all. I don't know how they got their dies, but they did an amazing job if they didn't steal them. I wonder if they have some kind of deal with JBL because they make replicas of most of their horns.

Loudspeakers plus has a # you can call for technical info at the bottom of the page

http://www.loudspeakersplus.com/html/ph2370-specs.html

http://www.speakercity.com/paudio/HornIndex.shtml

Re: Good lense for the JBL 2426H [message #36630 is a reply to message #36629] Fri, 24 May 2002 19:07 Go to previous messageGo to next message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
Those lenses look just about perfect for my application.

Thanks ToFo!

Adam

Re: Good lense for the JBL 2426H [message #36631 is a reply to message #36630] Fri, 24 May 2002 19:16 Go to previous message
ToFo is currently offline  ToFo
Messages: 219
Registered: May 2009
Master
let me know how it works out.

Thomas

Previous Topic: question about thermionic 3 plans and bracing
Next Topic: Pi Pictures
Goto Forum:
  


Current Time: Wed Nov 13 04:35:30 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest