Hello; I searched on "bracing" and found some great pictures of bracing that Wayne has done on the PI 4. The question is where does the 18 inches come into play as specified in the plans? It looks like two braces near the horn and two near the woofer. Plans say brace every 18 inches. How does the 18 inches relate to thermionic 3. My kit has been ordered and I am getting a jump on the cabinet making. Thanks for any ideas. Ray.
Wayne Parham Messages: 18738 Registered: January 2001
Illuminati (33rd Degree)
Don't skimp on the bracing. The suggestion of every 18" should be considered a minimum, or rather a maximum span of linear board that should be allowed without being braced. Cut braces to fit snugly but not so tight you need to beat them in. We want to support and preload the panels, but not to bulge them out.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
