AudioRoundTable.com: Pi Speakers » Lathe turned horn for PSD2002

Home » Sponsored » Pi Speakers » Lathe turned horn for PSD2002

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Lathe turned horn for PSD2002 [message #36580]

Thu, 23 May 2002 04:21

MartinG
Messages: 11
Registered: May 2009

Chancellor

The link below is from the High Efficiency Forum. Volvotreter is turning his own traxtrix horns out of MDF. I'm new to this kind of thing but how hard would it be to turn one to use a PSD2002 on top of a 4pi? Volvotreter has some info on his website but I don't understand much of it (yet!).

Anybody got any ideas, comments?

http://www.AudioAsylum.com/forums/HUG/messages/27707.html

Report message to a moderator

Re: Lathe turned horn for PSD2002 [message #36584 is a reply to message #36580]

Thu, 23 May 2002 07:25

str8aro
Messages: 12
Registered: May 2009

Chancellor

It wouldn't be too hard if you were already good at lathe work and had a lathe with the capacity for it. If you wanted to make a really deep one you could get into issues with the boring bar needed, but you'd also need a really big lathe so the boring bar probably wouldn't be such a big deal at that point... You do want to make sure you're not overloading the lathe, though. You can burn out bearings and other such fun things.

John

Report message to a moderator

Re: Lathe turned horn for PSD2002 [message #36585 is a reply to message #36584]

Thu, 23 May 2002 08:00

MartinG
Messages: 11
Registered: May 2009

Chancellor

The one he shows on his website is an 850Hz Traxtrix. He used a small metal lathe. It looks like the same size horn would fit on my Jet Mini Lathe.

Report message to a moderator

Wood horns available online [message #36588 is a reply to message #36585]

Thu, 23 May 2002 08:46

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

Those horns look great! Sound like you're into making them yourself, but if you are interested, we have wood horns available on the π Speakers shopping cart.

Report message to a moderator

Re: Wood horns available online [message #36590 is a reply to message #36588]

Thu, 23 May 2002 09:53

MartinG
Messages: 11
Registered: May 2009

Chancellor

Mr. Martinelli's horns are beautiful. I'd love to have a pair but I have this DIY bug ...

Report message to a moderator

Re: Lathe turned horn for PSD2002 [message #36592 is a reply to message #36585]

Thu, 23 May 2002 10:13

str8aro
Messages: 12
Registered: May 2009

Chancellor

Just be careful if that's a wood lathe you're talking about. The headstock bearings might be much more robust in a metal lathe. Don't you usually use a tailstock when turning wood? Doing the horns, you won't have that support. I suppose you could turn the outside diameter using a tailstock center and then put a center rest on the mouth of the horn...

Report message to a moderator

Re: Lathe turned horn for PSD2002 [message #36594 is a reply to message #36592]

Thu, 23 May 2002 12:31

MartinG
Messages: 11
Registered: May 2009

Chancellor

That's how I figured to do it. I do a lot of bowls and boxes using a faceplate or a chuck. The real problem for me is going to be getting the contour right.

Report message to a moderator

Re: Wood horns available online [message #36600 is a reply to message #36590]

Thu, 23 May 2002 17:46

bmar
Messages: 346
Registered: May 2009

Grand Master

Hi Marting,

Thank you very much. I have the next generation in production now. I will be able to post some pics of some different woods that are available next week. After some initial testing the Aluminum mounting throat has been re designed to offer an even flatter response curve.

I dont blame you one bit for wanting to make your own. I would only suggest you consider making a rectangular horn. They are my preference. I can swing 23" on my larger lathe but I've chosen the square over the round. I think the effort that goes into the square horn is worth it. It's all preference.

Its possible there will be some unfinished kits available later in the fall. so keep an eye open.

Thanks,

Bill