AudioRoundTable.com: Pi Speakers » What would you build with these JBL drivers and horns?

Home » Sponsored » Pi Speakers » What would you build with these JBL drivers and horns?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

I don't know why that falling response is desirable. [message #36529 is a reply to message #36499]

Mon, 20 May 2002 04:47

KevinP
Messages: 12
Registered: May 2009

Chancellor

But there seems to be a lot of drivers that have that characteristic. My guess is that using them in a horn to bring up part of the response would be part of their intended use. I don't really know... maybe Wayne can comment.

The older driver has better efficiency also... just by a smidgen. The newer 2012 is supposed to be lower distortion but I suspect they are both so low over the their frequency range that the parts would be identical for all practical purposes.

Report message to a moderator

[Message index]

		What would you build with these JBL drivers and horns? By: TimG on Thu, 16 May 2002 12:57
		Dude By: mikebake on Thu, 16 May 2002 13:22
		You read my mind look at the time on the posts!! LOL nt. By: Robert Hamel on Thu, 16 May 2002 13:24
		You can get a 16 Ohm version of the 2123 mid-range By: KevinP on Fri, 17 May 2002 06:22
		Re: You can get a 16 Ohm version of the 2123 mid-range By: JohnR on Fri, 17 May 2002 17:18
		I don't know why that falling response is desirable. By: KevinP on Mon, 20 May 2002 04:47
		Re: What would you build with these JBL drivers and horns? By: Robert Hamel on Thu, 16 May 2002 13:23
		I'd build an excellent, world-class system. That's what I'd do! By: Wayne Parham on Thu, 16 May 2002 15:14
		Re: I'd build an excellent, world-class system. That's what I'd do! By: Adam on Thu, 16 May 2002 15:30

Previous Topic:	Please "light trough" RCF motors
Next Topic:	4Pi WIDTH, ROOM BOOST AND PORT PLACEMENT?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Dec 01 19:18:16 CST 2024