Home » Sponsored » Pi Speakers » Built-in bass for Oris horns in dedicated sound room
Built-in bass for Oris horns in dedicated sound room [message #36347] Wed, 08 May 2002 11:33 Go to next message
JLM is currently offline  JLM
Messages: 69
Registered: May 2009
Viscount
Calling Dr. Wayne, calling Dr. Wayne...

We posted back and forth last week regarding the above. You mentioned a nice option of a large basshorn cabinet to acheive 20 Hz and hopefully 108 dB efficiency to match well with Oris horns (160 Hz 1st order crossover).

O.K. then, here's your chance to help design my sound room. Please send speaker plans (cabinets, driver specified, etc.) and optimally fit them into the room.

Any additional design features (already considering dedicated 30 amp circuit using 10 ga. wire; Golden Ratio room dimensions; absorption/diffusion at 1st reflection points between speakers and listener; and back wall set to a slight angle) would be great!

I would stipulate 8 foot flat ceilings with a loveseat and desk/office chair behind both in the sweet spot.

thanks tons.

Re: Built-in bass for Oris horns in dedicated sound room [message #36352 is a reply to message #36347] Wed, 08 May 2002 16:44 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18773
Registered: January 2001
Illuminati (33rd Degree)

Please write to me and tell me your E-Mail address and I'll send you the plans.

Previous Topic: Wayne, check this out...
Next Topic: L-Pad Calc
Goto Forum:
  


Current Time: Mon Sep 30 02:17:57 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest