Home » Sponsored » Pi Speakers » Pi designed bass for Oris horns?
Re: Pi designed bass for Oris horns? [message #36277 is a reply to message #36264] Sat, 04 May 2002 19:43 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18894
Registered: January 2001
Illuminati (33rd Degree)

I'd start by positioning the speakers in the corners, with the mid/high horns facing in at 45 degrees so that their pattern was within the wall angle. This allows the bass to operate in eighth-space, but doesn't introduce early reflections at higher frequencies because the mid/high horn pattern is within the wall angle. Keep the path length distance between sound sources under 1/4 wavelength at the crossover point. So for crossover around 200Hz, that's about a foot and a half.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 10pi + fronthorn
Next Topic: My Oris/10Pi system
Goto Forum:
  


Current Time: Sat May 17 03:36:24 CDT 2025

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest