AudioRoundTable.com: Pi Speakers » Question for Wayne

Home » Sponsored » Pi Speakers » Question for Wayne

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: one π, two π and four π kits [message #36000 is a reply to message #35999]

Wed, 17 April 2002 11:06

Wayne Parham
Messages: 18764
Registered: January 2001

Illuminati (33rd Degree)

It is impossible to run a four π loudspeaker without a crossover. You can replace the passive crossover with an active one, but the speaker needs some type of crossover. As for the level of complexity building a kit, no soldering is required, so it's really "plug and play" in that regard. You'll need to physically install the components into your cabinet and that's all.

Report message to a moderator

[Message index]

		Question for Wayne By: BobCat on Mon, 15 April 2002 18:15
		one π, two π and four π kits By: Wayne Parham on Mon, 15 April 2002 21:22
		Baltic Birch Ply or MDF? By: BobCat on Mon, 15 April 2002 23:04
		Re: Baltic Birch Ply or MDF? By: Wayne Parham on Mon, 15 April 2002 23:56
		pe 260-311 is similar, but mounts in a 3 in. By: Sam P. on Tue, 16 April 2002 06:18
		Re: one π, two π and four π kits By: Edwin on Wed, 17 April 2002 04:12
		Re: one π, two π and four π kits By: Wayne Parham on Wed, 17 April 2002 11:06
		Thanks Wayne (nt) By: Edwin on Wed, 17 April 2002 14:52

Previous Topic:	Speaker Plans
Next Topic:	Active Crossover Designs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 16 16:51:56 CDT 2024