AudioRoundTable.com: Pi Speakers » Wayne, what about the compensation network??

Home » Sponsored » Pi Speakers » Wayne, what about the compensation network??

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

I do not have a design for the Kappa 15LF [message #35959 is a reply to message #35952]

Sat, 13 April 2002 19:09

Wayne Parham
Messages: 18726
Registered: January 2001

Illuminati (33rd Degree)

The Theater four π Speaker uses a Delta 15A, not a Kappa 15LF. And - Yes - The appropriate crossover containing top octave compensation is required. You will need to also calculate cabinet dimensions, as we discussed in your earlier thread

Report message to a moderator

[Message index]

		Wayne, what about the compensation network?? By: Erik from Holland on Sat, 13 April 2002 01:33
		what cable to use By: Zeno on Sat, 13 April 2002 07:11
		I do not have a design for the Kappa 15LF By: Wayne Parham on Sat, 13 April 2002 19:09
		Re: I do not have a design for the Kappa 15LF By: Adam on Sat, 13 April 2002 19:23
		Re: I do not have a design for the Kappa 15LF By: Wayne Parham on Sat, 13 April 2002 19:51
		Re: Taming the 1.2-1.7 midrange on Kappa 15LF motors By: mhammill on Sat, 13 April 2002 20:58
		Re: Taming the 1.2-1.7 midrange on Kappa 15LF motors By: Wayne Parham on Sat, 13 April 2002 21:31

Previous Topic:	Wayne, I just can't downsize.........
Next Topic:	Horn flare survey

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 18:20:19 CDT 2024