AudioRoundTable.com: Pi Speakers » Wayne, what about the compensation network??

Home » Sponsored » Pi Speakers » Wayne, what about the compensation network??

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Wayne, what about the compensation network?? [message #35952]

Sat, 13 April 2002 01:33

Erik from Holland
Messages: 36
Registered: May 2009

Baron

Hi, wayne

Do i need a compensation network together with the Theater 4 Pi with a kappa lf and a psd2002?

You recommended the 1k6a filter to me wich should be for the 4pi with delta lf 12", but wich steepness must it have 10dB or 12dB.

Could you tell me how to build the compensation network?

You people are talking about gauge thickness of cable, could you tell me what thickness to use in metric?

Thanks Erik.

Report message to a moderator

what cable to use [message #35955 is a reply to message #35952]

Sat, 13 April 2002 07:11

Zeno
Messages: 122
Registered: May 2009

Master

ya i would like to know also, i am testing my Pi 4 tomorrow.

Report message to a moderator

I do not have a design for the Kappa 15LF [message #35959 is a reply to message #35952]

Sat, 13 April 2002 19:09

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

The Theater four π Speaker uses a Delta 15A, not a Kappa 15LF. And - Yes - The appropriate crossover containing top octave compensation is required. You will need to also calculate cabinet dimensions, as we discussed in your earlier thread

Report message to a moderator

Re: I do not have a design for the Kappa 15LF [message #35962 is a reply to message #35959]

Sat, 13 April 2002 19:23

Adam
Messages: 419
Registered: May 2009

Illuminati (1st Degree)

I'll give you my Kappa design if you want it.

Adam

Report message to a moderator

Re: I do not have a design for the Kappa 15LF [message #35963 is a reply to message #35962]

Sat, 13 April 2002 19:51

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

I think people would be interested. I've just been telling people to run PiAlign and build according to the dimensions given. But there have been a lot of posts about the Kappa's, so I think they are pretty popular.

Report message to a moderator

Re: Taming the 1.2-1.7 midrange on Kappa 15LF motors [message #35964 is a reply to message #35963]

Sat, 13 April 2002 20:58

mhammill
Messages: 23
Registered: May 2009

Chancellor

Is this an issue? I can't decide between the delta15 and the kappa15lfa.(smooth midrange larger box/ or /better low end extention and smaller box) If the kappa15lfa could sound smooth in the mids it will be my choice but not at the expence of a realistic mid/vocal range.
Any thoughts
Thanks
Mike H

Report message to a moderator