AudioRoundTable.com: Pi Speakers » 14ga romex for speaker cable and X/O wiring

Home » Sponsored » Pi Speakers » 14ga romex for speaker cable and X/O wiring

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

14ga romex for speaker cable and X/O wiring [message #35931]

Thu, 11 April 2002 21:10

mhammill
Messages: 23
Registered: May 2009

Chancellor

I know you recommend 16 or 18ga stranded wire and don't like the magnet wire due to the high resistance, but is there any problem with using 14ga solid core house wiring? It's cheap and low in resistance for longer distances like I need between my living and dining room areas.
And would it be good to twist it together or separate the pos and neg runs?
Thank's
Mike H.

Report message to a moderator

[Message index]

		14ga romex for speaker cable and X/O wiring By: mhammill on Thu, 11 April 2002 21:10
		Speaker cable and wire properties By: Wayne Parham on Fri, 12 April 2002 12:23

Previous Topic:	a few more pics up
Next Topic:	higher than 6th order Bandpass?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 14 07:06:55 CDT 2024