AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Port air speed.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

20Hz High pass filter [message #35811 is a reply to message #35810]

Fri, 05 April 2002 00:10

Wayne Parham
Messages: 18950
Registered: January 2001

Illuminati (33rd Degree)

To limit VLF, use a steep high-pass filter set at or above fl. It's probably best to use an active filter, because components for a passive (speaker circuit) filter will be large and expensive.

Report message to a moderator

[Message index]

		Port air speed. By: dbeardsl on Thu, 04 April 2002 11:34
		try to avoid operation below Fs By: Sam P. on Thu, 04 April 2002 12:09
		Re: Port air speed. By: Wayne Parham on Thu, 04 April 2002 14:55
		we don't need no stinking subject. By: dbeardsl on Thu, 04 April 2002 23:07
		20Hz High pass filter By: Wayne Parham on Fri, 05 April 2002 00:10
		fanning air vs. imparting a compression wave By: Sam P. on Fri, 05 April 2002 10:05
		Re: Port air speed.IS BASED ON MAX POWER ON ISD By: mhammill on Thu, 04 April 2002 16:54

Previous Topic:	Tweeter questions
Next Topic:	Musical Fidelity MC-2

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Jul 18 06:24:27 CDT 2025