AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Quick question

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Quick question [message #35797]

Wed, 03 April 2002 22:26

Erik from Holland
Messages: 36
Registered: May 2009

Baron

Do i nead a Peavey CH3 horn-flare? I mean, is`nt there a eminence horn flare wich will work?

Ordering a horn-flare from Peavey is a bit of a problem.

Erik

Report message to a moderator

Quick answer [message #35798 is a reply to message #35797]

Thu, 04 April 2002 02:57

Wayne Parham
Messages: 18722
Registered: January 2001

Illuminati (33rd Degree)

The Eminence H290 horn flare will work perfectly well in all π Speakers designs using a 1" exit compression driver and a 1.6kHz crossover frequency. Don't try to use an H290 in other designs that run the tweeter much lower though because it's a 1kHz horn.

Report message to a moderator

Previous Topic:	Why not Kappa 15?
Next Topic:	minimum width of cabinet on Three Pi reflex

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jul 11 10:38:14 CDT 2024