AudioRoundTable.com: Pi Speakers » minimum width of cabinet on Three Pi reflex

Home » Sponsored » Pi Speakers » minimum width of cabinet on Three Pi reflex

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: two "walls" will be almost touching the driver [message #35783 is a reply to message #35769]

Wed, 03 April 2002 16:31

Hodel
Messages: 5
Registered: May 2009

Esquire

Sam,
Thanks for the help...it sounds like I need to make sure I have enough room on the sides for the damping material. Could you recomment anything other than fiberglass (like bubble pack?). Do I increase the volume of the enclousure by the volume of the fiberglass/bubblepack or is it transparent to sound? I will use the same volume as Wayne suggest for the Thermionics Three Pi reflex which is about 4 cubic feet.

Report message to a moderator

[Message index]

		minimum width of cabinet on Three Pi reflex By: Hodel on Tue, 02 April 2002 15:50
		two "walls" will be almost touching the driver By: Sam P. on Wed, 03 April 2002 05:55
		Re: two "walls" will be almost touching the driver By: Hodel on Wed, 03 April 2002 16:31
		effect of 'glass on box volume By: Sam P. on Thu, 04 April 2002 05:49
		Re: minimum width of cabinet on Three Pi reflex By: DavidW on Wed, 03 April 2002 17:16

Previous Topic:	Quick question
Next Topic:	Erik from Holland - do you play in band?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 12:34:44 CST 2024