AudioRoundTable.com: Pi Speakers » Eminance horn bolts

Home » Sponsored » Pi Speakers » Eminance horn bolts

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Eminance horn bolts [message #35580]

Wed, 20 March 2002 02:53

TOttman2
Messages: 11
Registered: May 2009

Chancellor

I just received my Eminance PSD 2002 drivers and the 290 horns from PartsExpress for my Theater Pi 4's. They didn't come with bolts. Does someone know what size and lenght I need to get ?

Thanks in advance...

Tom

Report message to a moderator

!/4" 20T.P.I. [message #35584 is a reply to message #35580]

Wed, 20 March 2002 05:03

Garland
Messages: 269
Registered: May 2009

Grand Master

The outside pair of holes are threaded for 1/4", 20 turns per inch.

Report message to a moderator

Re: !/4" 20T.P.I. [message #35586 is a reply to message #35584]

Wed, 20 March 2002 05:48

TOttman2
Messages: 11
Registered: May 2009

Chancellor

Thanks for the info.

I posted on the PartsExpress Tech site yesterday... so far no response.

Tom

Report message to a moderator

Re: Eminance horn bolts [message #35610 is a reply to message #35580]

Wed, 20 March 2002 20:00

Super_BQ
Messages: 37
Registered: May 2009

Baron

You can take a look at the photo below what i've done to fit the bolt:

The local fastener shop had a hard time identifying the alen key bolt to fit in. On the invoice the description of the bolt is "Socket Cap Screw - 6 x 16". So i assume 6mm head x 16mm long for the inside 3 bolts. $1.35NZ each so (60 cents US each).

Report message to a moderator

Previous Topic:	no promises but i'm try to snag one of these tube
Next Topic:	More four π photo's

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 18 07:36:39 CST 2024