AudioRoundTable.com: Pi Speakers » 2426 horn loading questions @ Altec 511 B, 2370 comparisons

Home » Sponsored » Pi Speakers » 2426 horn loading questions @ Altec 511 B, 2370 comparisons

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

All I was trying to point out was... [message #35451 is a reply to message #35450]

Tue, 12 March 2002 10:16

::mikeo::
Messages: 4
Registered: May 2009

Esquire

... that by the time you cut the welds or remove the end bell of the 511/811 - you windup with the emilar horn.
So, for anyone curious what that "sound" is like, it would be far easier to get a pair of the emilar horns and try them on for size. Rather that going thru the PITA mods to the 811/511 horns.
A picture is worth a thousand words - right.
What easier way to show what you would wind up with when radically modding the altec horn.
That's the only thing I was trying to convey Sam
::mikeo::

Report message to a moderator

[Message index]

		2426 horn loading questions @ Altec 511 B, 2370 comparisons By: jlharden on Sun, 10 March 2002 11:54
		Re: 2426 horn loading questions @ Altec 511 B, 2370 comparisons By: Wayne Parham on Sun, 10 March 2002 14:41
		well damped 511's By: Sam P. on Mon, 11 March 2002 12:09
		Re: well damped 511's (and structural mods) By: Wayne Parham on Mon, 11 March 2002 20:43
		further mods...2035 update By: Sam P. on Tue, 12 March 2002 07:46
		After all those mods you wind up with .... By: ::mikeo:: on Tue, 12 March 2002 08:35
		here it is By: ::mikeo:: on Tue, 12 March 2002 09:19
		ask anyone with a fake rolex By: Sam P. on Tue, 12 March 2002 09:59
		All I was trying to point out was... By: ::mikeo:: on Tue, 12 March 2002 10:16
		I understand the profile looks similar By: Sam P. on Tue, 12 March 2002 10:38
		Reminds me of "The Joker" By: ::mikeo:: on Tue, 12 March 2002 10:54

Previous Topic:	Theater 4Pi plans - 3/4" material ?
Next Topic:	Kappa 15?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 16 14:27:17 CDT 2024