Home » Sponsored » Pi Speakers » birth announcement
quick "test" [message #35360 is a reply to message #35355] Thu, 07 March 2002 12:49 Go to previous message
Sam P. is currently offline  Sam P.
Messages: 307
Registered: May 2009
Grand Master
Just had to check the bottom end of these 2035H's. Referenced to 100 Hz., the F10 is 45 Hz. The "as built" net Vb is 2.5 cu. ft., 14 sq. inches of port (two 3 inch dia. tubes) x 3 inches long...guesstimated initial Fb should have been around 50 Hz...but measured Fb is 42 Hz...

implying the 1.2 cu.ft. of R13 installed in each enclosure has "enhanced" the internal volume considerably...just the rear wall, and most of the sides are covered...spaced 1 inch away from the inner walls.

Less 'glass, or shorter port tubes??? What the heck, jbl tunes 'em to 40 Hz. anyway, but unless my Fb is 54 Hz., my tuning won't be as specified for "Pi alignment"...Sam

 
Read Message
Read Message
Read Message
Previous Topic: Horns for Theater 4Pi
Next Topic: for seekers of the mighty CH3
Goto Forum:
  


Current Time: Thu Aug 01 16:24:56 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest