AudioRoundTable.com: Pi Speakers » Questions on dual 2226 woofer cabinets

Home » Sponsored » Pi Speakers » Questions on dual 2226 woofer cabinets

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Use an 600-800Hz crossover on the 2446 [message #35308 is a reply to message #35305]

Mon, 04 March 2002 15:04

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

I've just sent to your E-Mail address the schematic for the 600Hz and the 800Hz passive networks used in π Speakers containing 2" exit drivers on horns having cutoff not to exceed 500Hz.

Report message to a moderator

[Message index]

		Questions on dual 2226 woofer cabinets By: jlharden on Mon, 04 March 2002 12:23
		Re: Here's a link By: BillEpstein on Mon, 04 March 2002 13:41
		Thanks, Bill! By: Wayne Parham on Mon, 04 March 2002 15:11
		Use an 600-800Hz crossover on the 2446 By: Wayne Parham on Mon, 04 March 2002 15:04
		Re: Use an 600-800Hz crossover on the 2446 By: jlharden on Mon, 04 March 2002 17:11
		Re: Use an 600-800Hz crossover on the 2446 By: Wayne Parham on Mon, 04 March 2002 22:56
		Re: Use an 600-800Hz crossover on the 2446 By: jlharden on Tue, 05 March 2002 15:21
		Re: Use an 600-800Hz crossover on the 2446 By: Wayne Parham on Tue, 05 March 2002 20:06

Previous Topic:	Types of distortion to avoid
Next Topic:	Will Pi Come Up with a "Tower" Enclosure?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Dec 12 07:23:56 CST 2024