AudioRoundTable.com: Pi Speakers » xover plan for 4648a-8, jbl 2345 with jbl 2426

Home » Sponsored » Pi Speakers » xover plan for 4648a-8, jbl 2345 with jbl 2426

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

xover plan for 4648a-8, jbl 2345 with jbl 2426 [message #34962]

Sat, 02 February 2002 18:13

tdc
Messages: 34
Registered: May 2009

Baron

The previous responses indicated that a pxb11 1k6 with the 10 mfd. cap removed does the bass end. The compensation network consists, I quess, of two resistors of some value in series on the pos side with a cap of some value between them bridging to the neg line???. If I on the right track could someone advise me and tell me what value to use for the resistors and cap. Thanks tdc

Report message to a moderator

[Message index]

		xover plan for 4648a-8, jbl 2345 with jbl 2426 By: tdc on Sat, 02 February 2002 18:13
		Crossover and compensation used with JBL 2226 and 2426 By: Wayne Parham on Sat, 02 February 2002 20:00
		Re: Crossover and compensation used with JBL 2226 and 2426 By: tdc on Sat, 02 February 2002 20:28
		Re: Crossover and compensation used with JBL 2226 and 2426 By: Wayne Parham on Sat, 02 February 2002 21:12
		Re: Crossover and compensation used with JBL 2226 and 2426 By: tdc on Sun, 03 February 2002 15:09

Previous Topic:	Rough Week.
Next Topic:	10 pi as bass bin

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 03 13:56:48 CST 2024