AudioRoundTable.com: Pi Speakers » initial thoughts on my ten pi's...

Home » Sponsored » Pi Speakers » initial thoughts on my ten pi's...

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Ten π assembly - Bracing and foam filler [message #34734 is a reply to message #34733]

Sun, 13 January 2002 22:05

Wayne Parham
Messages: 18784
Registered: January 2001

Illuminati (33rd Degree)

There is no way to really "test run" a ten π speaker before the expansion foam is installed. Bracing and filling with expansion foam are esential. There are lots of large panels in this system, and they simply must have adequate bracing or the speakers sound terrible. Some previous threads that discuss proper bracing include "Bracing", "ten Pi injection foam - VERY IMPORTANT" and "Bracing: expansion foam".
Report message to a moderator

[Message index]

		initial thoughts on my ten pi's... By: Adam on Sun, 13 January 2002 15:48
		pic By: Adam on Sun, 13 January 2002 18:42
		Ten π assembly - Bracing and foam filler By: Wayne Parham on Sun, 13 January 2002 22:05
		Re: Ten π assembly - Bracing and foam filler By: Adam on Mon, 14 January 2002 08:06
		Re: Ten π assembly - Bracing and foam filler By: Wayne Parham on Mon, 14 January 2002 11:20
		Re: Ten π assembly - Bracing and foam filler By: Adam on Mon, 14 January 2002 15:32
		Re: Ten π assembly - Bracing and foam filler By: Wayne Parham on Mon, 14 January 2002 20:19
		ahhh....... By: Adam on Tue, 15 January 2002 04:39
		Re: Ten π assembly - Bracing and foam filler By: tom clark on Tue, 15 January 2002 23:21
		Ten π horn participation in system response By: Wayne Parham on Wed, 16 January 2002 00:24
		Re: Ten π assembly - Bracing and foam filler By: BillEpstein on Mon, 14 January 2002 21:08
		Re: Ten π assembly - Bracing and foam filler By: Adam on Tue, 15 January 2002 04:42
		Don't even think about it By: JLapaire on Mon, 14 January 2002 05:25
		Re: initial thoughts on my ten pi's... By: mikebake on Mon, 14 January 2002 17:39

Previous Topic:	Impedance question for the smart guys
Next Topic:	Rear ports for PA speakers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 19 00:52:38 CST 2024