AudioRoundTable.com: Pi Speakers » Impedance question for the smart guys

Home » Sponsored » Pi Speakers » Impedance question for the smart guys

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Impedance question for the smart guys [message #34718]

Sun, 13 January 2002 03:23

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

Okay, we've got the 2226J with an 16 ohm impedance. An 100 watt amp @8 ohms is only going to have 50 watts to the 16 ohm load. So it should be desirable to bring the speakers impedance down to 8 ohms, right?
And putting an 16 ohm resistor across the + and - (in parallel) would give 8 ohms, yes?

So, is it desirable and/or necessary to do so and is it as simple as using a single resistor? I just have to combine enough resistors in series to match the power handling of the speaker?

Report message to a moderator

[Message index]

		Impedance question for the smart guys By: BillEpstein on Sun, 13 January 2002 03:23
		Re: Impedance question for the smart guys By: Garland on Sun, 13 January 2002 05:44
		Don't you loose 3db in the resistor?? By: Robert Hamel on Sun, 13 January 2002 06:59
		TAANSTAAFL By: BillEpstein on Sun, 13 January 2002 09:28
		Re: TAANSTAAFL By: bmar on Tue, 15 January 2002 21:06
		Speaker impedance By: Wayne Parham on Sun, 13 January 2002 12:56

Previous Topic:	1st-timer w/ 4 Pi Questions (kinda long)
Next Topic:	initial thoughts on my ten pi's...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Oct 14 20:11:13 CDT 2024