AudioRoundTable.com: Pi Speakers » Any designs with Eminence Kappa woofers?

Home » Sponsored » Pi Speakers » Any designs with Eminence Kappa woofers?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Any designs with Eminence Kappa woofers? [message #34701]

Sat, 12 January 2002 07:58

RyanH
Messages: 20
Registered: May 2009

Chancellor

Hi,
I was wondering if any of the designs would work with Eminence Kappa drivers (the Pro 15 by the way). I can get these for a very reasonable price and would very much like to use them. The box design isn't a problem, but the crossover is. I just want to make sure the crossover will work well with them. Thanks!
--Ryan

Report message to a moderator

Also... [message #34702 is a reply to message #34701]

Sat, 12 January 2002 08:01

RyanH
Messages: 20
Registered: May 2009

Chancellor

Acutally any of the Kappa 15s would work: regular Kappa 15A, Kappa 15LFA, or the Pro. Thanks again in advance for any replies.
--Ryan

Report message to a moderator

Re: Also... [message #34704 is a reply to message #34702]

Sat, 12 January 2002 10:04

Adam
Messages: 419
Registered: May 2009

Illuminati (1st Degree)

me... I have four 15lfa's. Very nice woofers.

Adam

Report message to a moderator

π crossover [message #34705 is a reply to message #34704]

Sat, 12 January 2002 12:35

Wayne Parham
Messages: 18748
Registered: January 2001

Illuminati (33rd Degree)

I don't use Kappas but I think the crossover will work for it. I use the same basic crossover for several woofers, changing just the Zobel values. Values for the tweeter circuit are specific to the driver, but a chart is provided for use with different ones.

Report message to a moderator

Re: π crossover [message #34725 is a reply to message #34705]

Sun, 13 January 2002 09:05

RyanH
Messages: 20
Registered: May 2009

Chancellor

Thanks! This will be a huge help. While I cannot build it just yet (I will when semester is over) I will buy the woofers so that I don't have to worry about missing out when they run out. Thanks again for your great help!
--Ryan

Report message to a moderator

Previous Topic:	10" phase plug
Next Topic:	No 4pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 17 03:20:18 CDT 2024