AudioRoundTable.com: Pi Speakers » rc network with active crossover?

Home » Sponsored » Pi Speakers » rc network with active crossover?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

compensation network can still be used [message #34656 is a reply to message #34654]

Mon, 07 January 2002 18:08

Sam P.
Messages: 307
Registered: May 2009

Grand Master

between the amp and driver, even with active. My HF drivers are at least 6, maybe 10 dB hotter than the LF system in use. When I go active, if I decide to implement top octave EQ, one possibility is use normal 2 way active xover, and use resistive padding and passive EQ on the HF driver as Wayne does. Or use more op amps. Passive EQ can be tweaked by ear easier. Sam

Report message to a moderator

[Message index]

		rc network with active crossover? By: jlharden on Mon, 07 January 2002 15:39
		Re: rc network with active crossover? By: Wayne Parham on Mon, 07 January 2002 16:00
		Re: rc network with active crossover? By: jlharden on Tue, 08 January 2002 03:21
		Re: rc network with active crossover? By: Wayne Parham on Sun, 03 March 2002 00:19
		compensation network can still be used By: Sam P. on Mon, 07 January 2002 18:08
		Re: rc network with active crossover? By: Mike Bates on Mon, 07 January 2002 21:31
		Re: rc network with active crossover? By: jlharden on Tue, 08 January 2002 03:17
		Re: rc network with active crossover? By: Mike Bates on Tue, 08 January 2002 06:54
		Sierra Brooks special 500Hz horns for TAD 2001s. By: steve jones on Sat, 12 January 2002 17:48
		Hybrid horn flares By: Wayne Parham on Sat, 12 January 2002 21:27

Previous Topic:	horn cutting adventure, murphy helped too!
Next Topic:	JBL flat frame loudspeakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 18:13:29 CST 2024