Home » Sponsored » Pi Speakers » Thanks Sam P., .....I think
Thanks Sam P., .....I think [message #34468] Tue, 18 December 2001 18:24 Go to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
I haven't heard anything to the contrary so I'm expecting a JBL 4648 with 2- 2226 8 ohm woofs. $221 delivered instead of $325 each plus freight. YEEEHAW!
I'm thinking corner 7's with Eminence tweeter and 3 channels of 200 watts for the old home theatre. Or maybe I keep the satellites for the fronts and build a great big center channel/subwoofer/TV stand.
I can't even figure out crossover schematics and I'm scoring drivers in the street.
Just shoot me, somebody.
are you sure you ordered a 4648? [message #34478 is a reply to message #34468] Wed, 19 December 2001 05:09 Go to previous messageGo to next message
Sam P. is currently offline  Sam P.
Messages: 307
Registered: May 2009
Grand Master
Till,
The ones I ordered are the 4648A-8, using a pair of 16 ohm 2226J's. The 4638 enclosure has the pair of 8 ohm 2035's. Check your form confirmation to see what is on it, to be sure. Sam
Re: are you sure you ordered a 4648? Yup.4648A-8 (nt) [message #34486 is a reply to message #34478] Wed, 19 December 2001 13:57 Go to previous messageGo to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
nt
there are three versions of the basic 4648, [message #34488 is a reply to message #34486] Wed, 19 December 2001 14:29 Go to previous messageGo to next message
Sam P. is currently offline  Sam P.
Messages: 307
Registered: May 2009
Grand Master
one is the 4648, using a pair of 2226H (8 ohm) woofs, with a system z of 4 ohms. Another, the one on the tent sale for $220, is the 4648A-8 using a pair of 2226J (16 ohm) woofs for a system z of 8 ohms (hence the -8 at the end of the model number?). Another version has the first woofs, with a network also. It appears to me that you have a pair of 16 ohm 2226J's coming...maybe Wayne can suggest proper xover values if you need them later. Sam

Thanks for the heads up Sam [message #34489 is a reply to message #34488] Wed, 19 December 2001 17:19 Go to previous messageGo to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
I should have seen that the 8 would be 8 ohms with the 2 drivers combined. But if I don't wind up using them in place of the Delta's I will use them together, with another PSD-2002 horn for a kick-ass center channel for my HT setup.
BTW, have you figured out how the "net weight" can be 137 lbs and the "shipping weight" is 104 lbs.? Is this a trick question?
I also wonder if the $220 covers all the truck freight from Northridge to Ohio!
Thats the empty cabinet. I did the same thing. [message #34490 is a reply to message #34489] Wed, 19 December 2001 17:56 Go to previous message
Robert Hamel is currently offline  Robert Hamel
Messages: 93
Registered: May 2009
Viscount
You have to watch those sheets! Tricky layout.
Previous Topic: speakers for a cabin
Next Topic: preliminary midwest audiofest info; hotel etc.
Goto Forum:
  


Current Time: Thu Nov 28 21:56:19 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest