AudioRoundTable.com: Pi Speakers » pushin' Eminence 1" to 1.2KHz

Home » Sponsored » Pi Speakers » pushin' Eminence 1" to 1.2KHz - how well does it work?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: MD2001 - Good down to 1Khz; PSD2002 - Slightly higher [message #34415 is a reply to message #34414]

Sat, 15 December 2001 12:56

Adam
Messages: 419
Registered: May 2009

Illuminati (1st Degree)

I find it weird that Eminence only advertises the frequency response of the 2002 as down to 1.5 kHz, yet the power rating is at 1 kHz. I am in agreeance with Wayne, I think you could run it down to 1.2 without a problem, you'll lose some power handling, though.... If you can keep the volume down a bit it should be fine.

Report message to a moderator

[Message index]

		pushin' Eminence 1" to 1.2KHz - how well does it work? By: freddyi on Sat, 15 December 2001 11:29
		MD2001 - Good down to 1Khz; PSD2002 - Slightly higher By: Wayne Parham on Sat, 15 December 2001 12:01
		Re: MD2001 - Good down to 1Khz; PSD2002 - Slightly higher By: Adam on Sat, 15 December 2001 12:56
		Cool rendered image! By: Wayne Parham on Sat, 15 December 2001 13:29
		Re: MD2001 - Good down to 1Khz; PSD2002 - Altec horns By: freddyi on Sat, 15 December 2001 13:42
		Peavey horns By: Wayne Parham on Sat, 15 December 2001 14:08
		Re: Peavey horns - maybe mine are CH-3? By: freddyi on Sat, 15 December 2001 14:23
		Nope. Yours are bigger. By: Wayne Parham on Sat, 15 December 2001 14:32

Previous Topic:	Crossover Distortion
Next Topic:	Compressed fiber carpet pad for cabinet damping?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 14 13:25:15 CDT 2024