AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » alpha

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

alpha [message #34015]

Sat, 06 October 2001 09:53

eki
Messages: 5
Registered: May 2009

Esquire

I want to make subwoofer using Eminence Alpha 10� Please tell me about box volume, dimensions and box tuning for single vented box.

Report message to a moderator

Alpha 10 tuning [message #34017 is a reply to message #34015]

Sat, 06 October 2001 14:52

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

An Alpha 10 in a 5 cubic foot box tuned to 40Hz has flat response down to 30Hz.

Report message to a moderator

Re: Alpha 10 tuning [message #34019 is a reply to message #34017]

Sun, 07 October 2001 04:47

eki
Messages: 5
Registered: May 2009

Esquire

Hello Wayne. I want too thank you for all your help. Is this speaker loud at 30hz? or is it barely loud there?

Report message to a moderator

Re: Alpha 10 tuning [message #34020 is a reply to message #34019]

Sun, 07 October 2001 08:28

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

The response curve is flat to 45Hz, down -3dB at 38Hz and -10dB at 30Hz. Its thermal limits and excursion limits are almost the same, giving maximum output of about 110dB at 1 meter. Within the passband, excursion is the limit between 50Hz and 80Hz and heat is the limit above and below that point. Obviously, the excursion limit is quite low below 35Hz, so high pass at that point.

Report message to a moderator