Home » Sponsored » Pi Speakers » Which drivers are suitable for Pi alignment?
Which drivers are suitable for Pi alignment? [message #33972] Sat, 29 September 2001 14:30 Go to next message
Frode is currently offline  Frode
Messages: 49
Registered: May 2009
Baron
I've been playing around with PiAlign for a while now, and was wondering if there are some qualities or parametres that make a driver more suitable for this alignment than others. Some designs makes more sense than others.

TIA
Frode

Pi Alignments compared with B4, C4 and QB3, revisited [message #33977 is a reply to message #33972] Sat, 29 September 2001 16:50 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18774
Registered: January 2001
Illuminati (33rd Degree)
The Pi Alignment Theory describes a method for determining motor cabinet volume and tuning for any woofer. The cabinets it suggests are very similar to Davies' 1981 implementation of Thiele/Small analysis, so this is like asking whether there are some drivers that are more suitable to Thiele/Small analysis than others. In fact, the tuning could be said to be in exact agreement because Pi alignments place it at 0.375Fts/Qts and Davies' is 0.37Fts/Qts. Not much difference. This is an example of two very different methodologies providing two very similar results and it tends to confirm both.
Previous Topic: Yellow glue: the good, the bad ......
Next Topic: Pi Aligned Afterburner & Port Calculation
Goto Forum:
  


Current Time: Sat Oct 12 02:18:09 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest