AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » I want more bass!

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Run TAD 1602's [message #33917 is a reply to message #33916]

Wed, 26 September 2001 04:20

Wayne Parham
Messages: 18778
Registered: January 2001

Illuminati (33rd Degree)

You might look at the TAD 1602. It isn't terribly expensive like their compression drivers are, and you could use them for a subwoofer.

Ft 21Hz
Vas 519L (18.3 cu ft)
Qts 0.21
Qms 2.78
Qes 0.23
Re 6.2 ohms
Le 0.9mH
Xmax 5mm (0.2")
Pe 300W
Sensitivity 97.5dB
BL 21
Impedance 8 ohms

Running PiAlign on this driver, we enter Vad=18.2, Frd=21 and Qd=5. It suggests a cabinet size of 3.66 cubic feet with a port of 3 1/2" x 6 3/16" and 4 13/16" long.

Report message to a moderator

[Message index]

		I want more bass! By: Frode on Wed, 26 September 2001 02:15
		Run TAD 1602's By: Wayne Parham on Wed, 26 September 2001 04:20
		Re: Run TAD 1602's By: pickle on Wed, 26 September 2001 14:28
		Re: Run TAD 1602's By: Wayne Parham on Wed, 26 September 2001 17:00
		Re: Run TAD 1602's By: Frode on Thu, 27 September 2001 05:16
		Re: Run TAD 1602's By: Wayne Parham on Thu, 27 September 2001 05:34
		Re: Run TAD 1602's By: Frode on Thu, 27 September 2001 06:14
		Subwoofers By: Wayne Parham on Thu, 27 September 2001 06:36
		I like the old JBL 2235h woofers By: Magnetar on Thu, 27 September 2001 07:45
		Agreed By: Wayne Parham on Thu, 27 September 2001 08:58

Previous Topic:	alpha and delta
Next Topic:	Anyone looking to compliment their Pi speakers with a subwoofer?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Oct 18 02:56:36 CDT 2024