Home » Sponsored » Pi Speakers » theil-small params for Fostex FE-103 (RS 40-1197)
theil-small params for Fostex FE-103 (RS 40-1197) [message #33907] Tue, 25 September 2001 07:51 Go to next message
Chris R is currently offline  Chris R
Messages: 133
Registered: May 2009
Master
Hi Folks,

I'm trying to find the T/S parameters for those little 4" full
range drivers from Radio Shack. I have one in a TQWP box that
works pretty well, but I'm thinking about putting two plus a piezo
tweeter in a Pi-aligned box for use as rear channel HT speakers.
They'll be good to about 80-100Hz. What I don't have is Vas
or resonant freq.

Thx, Chris

Re: theil-small params for Fostex FE-103 (RS 40-1197) [message #33913 is a reply to message #33907] Tue, 25 September 2001 16:32 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18789
Registered: January 2001
Illuminati (33rd Degree)
Here's what I have for the Fostex FE-103E. Not sure if it's the same as the Radio Shack 40-1197 or not.

Vas = 420 c.i.
Qts = 0.35
Fr = 80Hz
Sensitivity = 89dB/2.83v/M
Max power = 15W
Xmax = 0.01"

Re: theil-small params for Fostex FE-103 (RS 40-1197) [message #33921 is a reply to message #33913] Wed, 26 September 2001 12:03 Go to previous messageGo to next message
MikeSt is currently offline  MikeSt
Messages: 1
Registered: May 2009
Esquire
I found this at www.radioshack.com It's not the complete T/S params, but it's a start. I'd do a search on the Full Range Driver Forum http://f18.parsimony.net/forum31999/ to see if the info is there. If not, post a message. Many folks on that forum have worked with the RS 40-1197.

MikeS

GENERAL
Nominal Impedance:.........................8 Ohm +/- 15% at 1.6 V & 400 Hz
Resonance Frequency:..............................80 Hz +/- 15 Hz at 1.6 V
Sound Pressure Level:................................90 dB/W (1m) +/- 2 dB
Power Handling Capacity:...............................................3 W
Music Power:..........................................................15 W
Weight:...................................................590 g (20.85 oz)

MAGNET
Dimensions:................................................80 x 40 x 10 mm
Weight:..................................................188.5 g (6.65 oz)

VOICE COIL
Nominal Diameter:......................................20.32 mm (0.8 inch)
Bobbin Material:.....................................................Paper
Wire Size:.........................................................0.12 mm
DC Resistance:.....................................................7.6 Ohm
Turns/Layers:............................................76 Turns/2 Layers
Winding Length:.....................................................5.6 mm


Re: theil-small params for Fostex FE-103 (RS 40-1197) [message #33960 is a reply to message #33921] Fri, 28 September 2001 07:41 Go to previous message
chrisR is currently offline  chrisR
Messages: 36
Registered: May 2009
Baron
Thanks Wayne and Mike, that is just what I needed.

Chris

Previous Topic: #1- Squaring up Sheet stock on the table saw
Next Topic: Port length on multiple ports
Goto Forum:
  


Current Time: Fri Nov 29 06:26:56 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest