altec 604-8g in pi enclosure [message #33627] |
Thu, 02 August 2001 14:18 |
RBS
Messages: 1 Registered: May 2009
|
Esquire |
|
|
hi wayne i recently picked up a pair of 604-8g drivers. they were originally in 3.5 cu ft vented boxes designed for soffit mounting andn in free space the bass rolled of starting at 150 Hz. any suggestions as to a pi aligned box. i'm thinking of a ported design in the corner. t/s parameters are as follows for the 604-8g fs: 28 Hz Re: 7 ohm Qts: .25 Qms: 8.3 Qes: .26 Vas: 624L Xmax: 3.8mmthanks all bob
|
|
|
|
|
|
Re: altec 604-8g in pi enclosure [message #33652 is a reply to message #33630] |
Thu, 09 August 2001 15:33 |
Jeff Robinson
Messages: 26 Registered: May 2009 Location: KC, MO
|
Chancellor |
|
|
You may want to check out the UREI 811 studio monitor design. They added another 15" woofer (from Eminence) with the 604-8G and these were one of the most popular large format studio monitors in the 80's. It is believed that the success of the UREI 811 actually contributed to the downfall of Altec by reducing demand for Altec monitoring systems.
Jeff Robinson
|
|
|