AudioRoundTable.com: Pi Speakers » altec 604-8g in pi enclosure

Home » Sponsored » Pi Speakers » altec 604-8g in pi enclosure

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

altec 604-8g in pi enclosure [message #33627]

Thu, 02 August 2001 14:18

RBS
Messages: 1
Registered: May 2009

Esquire

hi wayne
i recently picked up a pair of 604-8g drivers. they were originally in 3.5 cu ft vented boxes designed for soffit mounting andn in free space the bass rolled of starting at 150 Hz. any suggestions as to a pi aligned box. i'm thinking of a ported design in the corner. t/s parameters are as follows for the 604-8g
fs: 28 Hz
Re: 7 ohm
Qts: .25
Qms: 8.3
Qes: .26
Vas: 624L
Xmax: 3.8mm

thanks all

bob

Report message to a moderator

[Message index]

		altec 604-8g in pi enclosure By: RBS on Thu, 02 August 2001 14:18
		Re: altec 604-8g in pi enclosure By: Wayne Parham on Thu, 02 August 2001 17:30
		Re: altec 604-8g in pi enclosure By: DFaulds on Fri, 03 August 2001 04:22
		Re: altec 604-8g in pi enclosure By: Wayne Parham on Fri, 03 August 2001 04:59
		Re: altec 604-8g in pi enclosure By: Jeff Robinson on Thu, 09 August 2001 15:33

Previous Topic:	Is JBL overpriced or are the high costs justified?
Next Topic:	Capacitors

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 13:51:08 CST 2024